Phoenix, AZ · Cabinet Contractor

Custom Cabinets & Refacing
for Phoenix Homes

Kitchen cabinets, bathroom vanities, refacing, and full custom builds for Phoenix proper — Arcadia, Biltmore, Camelback East, North Phoenix, Ahwatukee, Moon Valley, and the central neighborhoods. Our shop is in Surprise (West Valley), so our overhead — and your quote — runs 15-30% under central Phoenix fabricators. AZ ROC #341113.

Cabinet Options

What We Build for Phoenix Kitchens

Real Numbers

Phoenix Cabinet Pricing & Timelines (2026)

What Phoenix metro projects actually close at this year. Quote is fixed in writing after we measure.

Project
Range
Total Time
Cabinet refacing (avg kitchen)
$4,500–$9,000
~3 weeks
Stock cabinets installed
$4,000–$8,000
~3–4 weeks
Semi-custom kitchen
$10,000–$20,000
~5–7 weeks
Fully custom kitchen
$20,000–$45,000
~6–10 weeks
Bathroom vanity replacement
$1,800–$4,500
~2–3 weeks
Home office built-ins
$3,500–$12,000
~4–6 weeks
Phoenix Neighborhoods

Where We've Worked

Real projects across central Phoenix and surrounding areas. References from your specific neighborhood on request.

Arcadia
Biltmore
Camelback East
North Phoenix
Moon Valley
Ahwatukee
Encanto
Coronado
Roosevelt
Sunnyslope
Paradise Valley Village
Desert Ridge
Phoenix Specifics

Why Phoenix Homeowners Hire Us

Phoenix is geographically vast — what we serve is the West and North-Central side: Deer Valley, Norterra, Anthem, Moon Valley, Glendale-adjacent NW Phoenix, plus the central historic neighborhoods (Encanto, Willo, Coronado, North Central) for full custom work. Our Surprise shop is 25–40 minutes from those Phoenix ZIPs depending on where you are and the time of day. We don't claim to be Phoenix-based; we're Surprise-based serving West/North Phoenix where we can deliver quality without a giant overhead premium.

Anthem & Norterra new-build upgrades

Anthem (technically unincorporated but Phoenix-served) and Norterra share builder-grade cabinet stock from the 2003–2018 build years. Refacing in painted shaker is the most common scope, $4,500–$9,000 with hardware.

Moon Valley & North Central historic restoration

1950s–60s Phoenix ranches in Moon Valley and along North Central want period-appropriate kitchens. Inset doors, beadboard panels, brass hardware. We do this; chain-store remodelers don't.

Deer Valley starter-home flips

85308/85310 starter homes — investors and owners both call us for fast, budget-conscious refacing. We'll quote a 4-day turnaround on stock refacing if doors are in stock at our suppliers.

Drive time from our Surprise shop: 25–40 minutes via Loop 101 or I-17. Service area landmarks: Norterra/Happy Valley Town Center, Desert Ridge Marketplace, North Mountain Park, Anthem Outlets.

Common Questions

Phoenix Cabinet FAQs

How much do custom cabinets cost in Phoenix?
Phoenix custom cabinet pricing in 2026: stock $4,000–$8,000, semi-custom $10,000–$20,000, fully custom $20,000–$45,000 for an average 25-linear-foot kitchen. Refacing $4,500–$9,000. Our West Valley shop overhead is 15-30% lower than central Phoenix fabricators — savings pass through to your quote.
Do you serve Arcadia, Biltmore, and North Phoenix?
Yes — we work all of Phoenix proper plus the surrounding areas: Arcadia, Biltmore, Camelback East, North Phoenix, Moon Valley, Ahwatukee, Encanto, Coronado, Roosevelt. About 35 minutes from our Surprise shop via the 303 / I-10.
Can you handle Phoenix HOA approval paperwork?
Yes. We provide AZ ROC #341113, certificate of insurance naming the HOA as additional insured if required, scope of work, and start/finish dates. We handle most Phoenix HOAs (Moon Valley, Mountain View, Ahwatukee Foothills, Biltmore Estates) and adjust scheduling for any quiet-hour windows.
How long does a Phoenix cabinet project take?
Refacing: ~3 weeks total (2-week material lead + 3-5 days install). Stock or semi-custom: 5-7 weeks. Fully custom: 6-10 weeks. We schedule countertop templating immediately after cabinet install so you're not stuck without counters.
Do you serve South Phoenix or East Phoenix?
We focus on North and West Phoenix — Deer Valley, Norterra, Anthem, Moon Valley, Encanto, North Central. South Phoenix and East Phoenix near Tempe/Mesa are an hour-plus drive each way; we'll quote the work but include a fair travel addition. Honest answer: a closer contractor is usually a better call.
Can you do Phoenix permit pulls?
Yes. The City of Phoenix Planning & Development Department handles cabinet-related permits when electrical, plumbing, gas, or wall changes are involved. We pull permits in our license name (AZ ROC #341113) and handle inspections.
How does Phoenix's heat affect cabinet design choices?
Direct sun on west or south walls in Phoenix kitchens hits 110–120°F surface temperature in summer. We recommend solid wood or MDF with UV-stable conversion-varnish or 2K-poly finishes — and never thermofoil on those walls. Inside the cabinets, we use brass or stainless hardware that doesn't tarnish in heat-cycled humidity.
Do you provide kitchen design services or just install?
Both. Design is included with cabinet scopes over $10,000 — we produce 3D renderings and a full elevation set. For smaller scopes we recommend our visualizer tools online and a 1-hour design consult during the in-home estimate.
Service Area

Also Serving Nearby

Same crew, same Surprise fabrication shop, same fixed pricing across our 50-mile West Valley service radius.

Free In-Home Cabinet Estimate

Door samples, finish chips, laser measure. We come to your Phoenix kitchen and quote on the spot.